Vertical Space Saving Hydraulic 2500kg Dependent Car Parking Equipment Hydraulic Triple Stacker

Product Description

Product Description

Hot Sale Double Hydraulic Car Parking Lift Parking Lift System

Model: XP-1118

XP-1118 is a new generation car parking lift of two post type. newly developed for lifting capacity 2000kg.Each lift creates one more parkin space, capable of stacking a sedan above a medium SUV on ground. Its compact structure enables smaller cover area than all existing models. An ideal product for home garages, apartment buildings. commercial buildings. etc. that with insufficient headroom as required by XP-1123 or XP-1127.

1. Carriage

2. Transparent oil tank (steel oil tank is optional)

3. Galvanized waving plate

4. Electric box

5. Key switch & emergency stop button

6. Dynamic anti-falling lock

7. Front footage

8. Limit switch

9. Power pack

10. Photocell sensor

Product Parameters

Model	XP-1118
Lifting capacity	2000kg / 4400lbs
Lifting height	1800mm / 71 inches
Usable platform width	2100mm/ 83 inches
Power pack	2.2kw hydraulic pump
Adaptable power supply	100-450v, 50/60hz
Operation mode	Key switch
Anti-falling lock	Available
Lock release	Electrical auto release
Control voltage	220v
Lifting time	Approx. 35s
Lowering time	Approx. 20s
Finishing	Powder coating with Akzo Nobel powders

 

Product Features

 

1. For dependent parking. 
2. Galvanized platform sheets with high rust resistance performance. 
3. Each lift offers 2 car spaces
4. Required headroom: 3520mm. 
5. Bolts & nuts withstand 72hrs Salt Spray Test.
6. Lifting capacity 2000kg. 
7. Driven by hydraulic cylinder + Korean lifting chain. 
8. Platform width 2100mm. 
9. Synchronizing chain keeps platform level during working under all conditions. 
10. Ground car height 1700mm. 
11. Standard upper car height 1550mm. 
12. Premier surface treatment of power coating enhanced by Akzo Nobel powders. 
13. New locking mechanism with superior safety & stability. 
14. Easier operation with electric auto release function. 
15. Proven quality compliant to CE standards. 

 

1. Limit switch in the top of the post. When the platform goes to the appointed height, it will automatic stopped to avoid the wrong operation

2. Pressure relief valve and pressure compensate flow control valve

3. Auto locking system in case electrical failure

4. Mechanical anti-falling safety lock every 100mm on the pos

5. Photocell sensor available to check under car and avoid trespass

6. Synchronization chain

7. Overload protection device for hydraulic power pack

8. Electric protection for power over load or under voltage

9. Emergency stop button

10. 24V electric lock release has no harm for operator

Notes

Scope of application:

Suitable for residential buildings, office buildings and business premises, hotels
Only for long-term users that have been instructed on how to use the system
For frequently changing users (e.g. for office, hotel and business premises or similar)
- only parking on ground level
- performance of technical system adjustments in necessary 
- consultation with XPROMISE is mandatory


Noise protection:

Insulation figure of the construction of min. Rw = 57 dB
Walls which are bordering the parking systems must be done as single wall and deflection resistant with min. m =300 kg/ m2
Solid ceiling above the parking systems with min. m = 400 kg/ m
At differing constructional conditions additional sound absorbing measures are to be provided by the customer
The best results are reached by separated sole plates from the construction. 


Electrical installation preparation: 

Cabling preparation to be performed by the customer:
- Up to the main switch to be in place prior to starting the installation operations
- Connection to the main switch during installation
- System functional check testing can be performed by the electrician provided by the customer

Grounding and potential equalization:
- To be performed by the customer compliant to local regulations
- Connections required every 10 meters 



Protection against corrosion:

Independent of a maintenance workings has to be carried out according to XPROMISE Cleaning and Maintenance Instruction regularly. 
Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)! 


Temperature:

The installation is designed to operate between +5°and +40°C. Atmospheric Humidity: 50% at +40°C.If the local circumstances differ from the above please contact XPROMISE


Fire safety:

Each and every fire safety requirement and all possible mandatory item(s) and equipment(s) (fire extinguishing systems and fire alarm systems, etc.) are to be provided by the customer. 


Parking:

- Drive the car backward onto the appropriate position of the platform. Collision with the control arm and side beams shall be avoided. 
- Put the brake on after vehicle parked on the targeted position to avoid any accidental movement
- Open the car door carefully to avoid any collision. Pay attention to the waving plates and side beams in case any falling down of person
- Turning UP to lift the car to the appropriate position, and the platform will be locked automatically. 
- Before another vehicle parked under platform, please check and make sure the nether vehicle is lower than platform height, to avoid any damage. 


Railings:

If walkways are arranged directly to the side or behind the systems, railings have to be provided acc. EN ISO 13857 by client acc. to local requirements, height min. 200cm.

Maintenance

1. Do lubrication on guide rail and guide pulley once per month.



2. Do lubrication on balance chain once per month.



3. Change all the hydraulic oil three months after first operation;and change oil every nine months after first changing.



4. Frequently check the screw nuts of bolts fixing the electromagnet and locking plate, if any screw nut is loosening please fasten it asap.



5. If any noise comes out from electromagnet, please replace it asap.

6. The seal in hydraulic cylinder should be replaced every two years. 



7. The roller and sliding block should be replaced every two years. 



8. The valve element in solenoid valve and filter in power unit should be cleaned every half year. 



9. Before operation, please check the connector of electromagnet if it's loosening please fasten it; then do testing on top limit switch and photocell sensor, if it cannot work please fix the problem, and if cannot fix it please replace it. 

 

Factory Tour

Yantai Lift Equipment Co.,Ltd. is a joint-stock enterprise specializing in a manufacturing and marketing of Wheel alignment, Car lift, Tire changer, Wheel balancer and other auto inspection instruments. Our company has built a reputation for innovation and visionary leadership in the application of the newest technologies to automotive car service equipment. 

                            3D Wheel Alignment                                                         Tire Changer Machine                                                        Wheel Blancer Machine          

Trade Info

Trade Terms	FOB / CFR
MOQ	3UNITS  (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee)
Port	QINGDAO
Shipment	BY SEA /AIR
Payment Terms	T/T
Payment condition	30% prepayment,balanced againt BL copy&L/C at sight.
Supply Capability	1000units/month
Sample Availability	Yes ,But all freight(Inland freight +seafreight) covered by buyer
Sample Time	5-10days(depends on whether have in stock)
Lead Time	25-30days(Rush season 5-10days longer)
Packing	Metal frame&Carton
Delivery time	30-45days shipping time (depends on destination position)
Service	1% free parts;1year warranty after port of destination

 

Our Advantages

Q: Are you a factory ?

A: Yes, our factory with an area of 20,000 square meters, specializing in the production of car lift, wheel alignment, tire changer, wheel balancer etc, garage equipment.


Q: Can I have a visit to your company before placing an order ?

A: Sure, welcome to visit our company. There is a showroom in our factory, you can get all what you want about the auto equipment.


Q: How do you control your production quality ?

A: We have an independent QC team. Our QC teams do sample inspection, part inspection during production and 100% final inspection before each shipment.


Q: Can you produce according to the samples ?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.


Q: Can you provide the whole workshop automotive equipment ?

A: Yes, we have 8 series contains nearly all automotive equipment. Also we have helped many customers to open their automotive workshop.


Q: May I know the Lead time ?

A: The lead time of our machine is 7 to 30 days. The specific delivery time depends on the items and the quantity of your order.


Q: What is your payment terms ?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.


Q: What is your terms of delivery ?

A: EXW, FOB, CFR, CIF, DDU, DDP


Q: How long is the warranty ?

A: Our warranty is 12 months, we will send free parts for replacement in warranty, supply spare parts for lifetime.


Q: How do you make our business long-term and good relationship ?

A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.